Klamflex - The experts in pipe fitting manufacture for worldwide distribution
Products
>> Ranger Couplings
a
  >> Ranger Step Couplings
a
  >> Ranger End Caps
a
  >> Gripper Couplings
a
  >> Dedicated Step Couplings
a
  >> Step Couplings
a
  >> Ranger Flange Adaptors
a
a
 
>> Gripper Flange Adaptors
Brass Ring
a
 
>> Gripper Flange Adaptors
Cast Ring
a
  >> Dismantling Joints
a
>> Shouldered Couplings
a
>> Junior Couplings
a
>> Special Ended Fittings
a
>> Repair Clamps
a
 
NEWS FLASH
a

a
a
Special Ended Fittings

KLAMFLEX Special Ended Steel Fittings are available in various fitting combinations, such as Bends, Tees, Reducers, and Crosses. These fittings are manufactured by welding a KLAMFLEX Half Coupling to the ends of a steel fitting. Bolts are used in the coupling joint; this ensures easy replacement of damaged fasteners. KLAMFLEX makes use of a profile plate that is welded to the steel fitting or lugs that are welded to the coupling sleeve to accommodate the tightening process. With either option only one weld is required to fit the half coupling to the fitting. We offer the dedicated sleeve type or ranger sleeve type arrangement. Installation is effected by simply inserting the plain ended pipe into the KLAMFLEX Half Coupling and tightening the studs. The use of these fittings will result in significant cost savings and ease of installation, as only one piece of equipment is being purchased, instead of separate fittings and coupling.

a
a
High Pressure Couplings

KLAMFLEX is currently undertaking an exercise on the design of the existing dedicated product range of Couplings, Flange Adaptors and Dismantling Joints that will enable Klamflex to supply high pressure items, in excess of a rating of 40 bar. This would include pressure diameter ratios of 50 Bar up to 2000nb, 64 Bar up to 1600nb and 100 bar up to 1400nb. Where necessary component material will be upgraded with regards to the mechanical and chemical composition as well as thicker sections would be used, to achieve the above.

a
a
CONTACT US
Technical In
Name
Area of interest
Company
Ranger Couplings
Ranger Flange Adaptors
Ranger Step Couplings
Ranger End Caps
Dedicated Step Couplings
Step Couplings
Dedicated Flange Adaptors
Gripper Flange Adaptors
Dismantling Joints
High Pressure Couplings
Junior Couplings
Gripper Couplings
Shouldered Couplings
Half Couplings
E-mail
Message


Klamflex Pipe Couplings (Pty) Ltd

Head Office Mobile
Tel: +27 11 762-5326

Fax: +27 11 762-5674

E-mail: sales@klamflex.com

19 Resnick
Factoria
Krugersdorp
1739


Mervyn Shaw  +27 64 860 7869
   
Wayne Poisson  +27 71 607 7495
   
Ig Van Rooyen  +27 76 053 7391
   
Kyle Shaw  +27 72 117 6001
   
   


 
TIME ZONE
GMT + 2 Hours



Location



formation
© 2010