Klamflex - The experts in pipe fitting manufacture for worldwide distribution
a
Products
a
>> Ranger Couplings
a
  >> Ranger Step Couplings
a
  >> Ranger End Caps
a
  >> Gripper Couplings
a
  >> Dedicated Step Couplings
a
  >> Step Couplings
a
  >> Ranger Flange Adaptors
a
a
 
>> Gripper Flange Adaptors
Brass Ring
a
 
>> Gripper Flange Adaptors
Cast Ring
a
  >> Dismantling Joints
a
>> Shouldered Couplings
a
>> Junior Couplings
a
>> Special Ended Fittings
a
>> Repair Clamps
a
 
NEWS FLASH
a

a
a
Special Ended Fittings

KLAMFLEX Special Ended Steel Fittings are available in various fitting combinations, such as Bends, Tees, Reducers, and Crosses. These fittings are manufactured by welding a KLAMFLEX Half Coupling to the ends of a steel fitting. Bolts are used in the coupling joint; this ensures easy replacement of damaged fasteners. KLAMFLEX makes use of a profile plate that is welded to the steel fitting or lugs that are welded to the coupling sleeve to accommodate the tightening process. With either option only one weld is required to fit the half coupling to the fitting. We offer the dedicated sleeve type or ranger sleeve type arrangement. Installation is effected by simply inserting the plain ended pipe into the KLAMFLEX Half Coupling and tightening the studs. The use of these fittings will result in significant cost savings and ease of installation, as only one piece of equipment is being purchased, instead of separate fittings and coupling.

a
a
High Pressure Couplings

KLAMFLEX is currently undertaking an exercise on the design of the existing dedicated product range of Couplings, Flange Adaptors and Dismantling Joints that will enable Klamflex to supply high pressure items, in excess of a rating of 40 bar. This would include pressure diameter ratios of 50 Bar up to 2000nb, 64 Bar up to 1600nb and 100 bar up to 1400nb. Where necessary component material will be upgraded with regards to the mechanical and chemical composition as well as thicker sections would be used, to achieve the above.

a
a
Repair Clamps

Klamflex Repair Clamps (KRC) are designed with a UNIQUE 2 STAGE sealing arrangement to provide a repair means for small leaks in Steel, PVC, HDPE, DI & AC pipelines.

The UNIQUE 2 STAGE sealing arrangement provides superior sealing capabilities enabling leaking pipes to be repaired more effectively and efficiently on site.

Klamflex uses only 16 REPAIR CLAMPS to accommodate pipe outside diameters from 48 to 380mm, making stocking more economical.

The KRC is rated to a maximum working pressure of 16 bar for pipe outside diameters of less than 234mm and 12 bar for pipe outside diameters over 234mm.

diagram

REPAIR CLAMPS - SIZE RANGE
NB
mm
RANGE
mm
WIDTH
mm
WIDTH
mm
WIDTH
mm
WIDTH
mm
APPROX MASS
(kg)
150
200
300
400
 
40-50
48-63 x       2.0
65
69-84 x       2.0
80
89-104 x       2.4
100
110-125 x       2.6
125
140-155   x     3.2
150 160-175   x     3.4
150 177-192   x     3.6
200 196-211   x     3.8
200 219-234   x     4.0
200-225 239-254     x   6.4
225-250
262-277     x   6.6
250 284-299     x   7.2
250-300 304-319     x   7.4
300 324-340       x 10.0
350 345-360       x 10.3
350 365-380       x 10.6

© 2010