The Largest Manufacturer of Pipe couplings, Flange Adaptors, Stepped Couplings, Dismantling Joints and related products in the Southern Hemisphere
Technical Data
>> Working Pressure
>> Expansion & Contraction
>> Temperature
>> Shear Strength
  >> Recommended Bolt Torque 
>> Pipe End Preperation 
>> Angular Deflection
  >> Lateral Displacement
  >> Ground Settlement
  >> Setting Gaps
>> Product Storage
  >> Cathodic Protection
>> Anchoring / Supporting Pipes
 
>> Fitting Instructions Up to
300m
 
>> Fitting Instructions Above 300mm
  >> Fitting Ranger Products
  >> Material Specifications
 
NEWS FLASH
a

Shouldered Couplings range expands to include 250mm and 300mm

a
READ MORE
 
EXPANSION AND CONTRACTION
Each KLAMFLEX Coupling will accommodate maximum pipe movement of 10mm and each flange adaptor 5mm. This is achieved by deformation of the sealing ring, not by a sliding action of the ring on the pipe and will cater for expansion and contraction resulting from temperature variations experienced under normal atmospheric conditions.

The resistance to pipe end separation offered by couplings is dependant upon the number of variable installation factors such as pipe surface, pipe tolerance, coupling component tolerances, etc. and is thus different for every case. For complete safety it is advisable to assume that the worst conditions prevail for each installation.

CARE MUST BE TAKEN TO MAINTAIN SETTING GAPS WITHIN THE LIMITS

Please see Setting Gaps section.


 
DOWNLOADS
A
A
A
A
A
A
A
A
A
A
A
© 2010